Description
We’re launching our new ultralight manual 32-Ton press brake! Engineered by Cammeck Equipment from the ground up to offer industrial bending capability for hobbyists and small businesses. Built with a focus on efficiency and Strength at an unbeatable value. This machine is intrinsically simple in its design and operation, making it an ideal solution for those seeking to elevate their metalworking projects without breaking the bank.
WARNING: FULL MANUAL OPERATION by hand, with dual hydraulic cylinders, on on each side. You manually press each side of the sheet to the desired V-contour. To get repeatable results you will need a digital magnetic protractor on each side of the sheet.
Not professional and perfect enough to make high-end decorations and architectural elements. Machine intended for general fabricating.
When bending 10 or 11 gauge there is slight material bowing in the center, meaning that the sides bend to 88* and the center may only be at 92*, therein creating the bend, but not perfectly consistent. We are working to strengthen one part.
Shop press NOT needed. It is not included and you do not need to get one.
Capabilities
Can bend 12 gauge thick sheet x 48″ wide
Can bend 10 gauge 1/8″ thick sheet x 36″ wide
Features
Fully Manual operation
Powered by dual 16-ton hydraulic cylinders (shipped separately)
Bottom “V” Die is 70 degrees or can be built to 85 degrees
Bottom “V” die is fixed at 1.5 inches. We don’t recommend using it for 3/16 or thicker steel.
Key Specs
| Weight | 140 lbs |
|---|---|
| Width of Opening | 48.5 Inches |
| Weight | 140 pounds |
| Weight (w/ hydraulic cylinders) | 160 pounds |
| Maximum Material Thickness | 1/8" Sheet Stock |
Release Information
Launched May 2025
Related products
Brake Press